People in life will use in production of all kinds of plastic bags, non-woven bags, paper bags, so the bag making machine usage is quite large, for processing all kinds of bag manufacturer, to improve the production efficiency, prevent security risks, the right to regulate the use of bag making machine is a must in the operation of, the following is a mechanical doctors graduated company sort of bag making machine equipment operation standard, reference for users:
1. Purpose: To standardize the operator's operation behavior
2. Scope: Bag making machine
3. Assignment Content:
3.1 Mental State:
3.1.1 Before going to work, I will adjust my mind and enter the workshop with good mental state, stable mood, energetic and comfortable mood. Ensure safety, high efficiency, quality, quantity and timely completion of production tasks.
3.1.2 Dress and hat neatly, without long hair, no ring, bracelet, vest or shorts. Otherwise, advise them to correct into the workshop; Those who have entered the workshop shall be ordered to leave the post and retake the post after correction. The labor contract shall be terminated for repeated insubordination.
3.2 Labor discipline:
3.2.1 Arrive at work on time, do not be late or leave early. One hour before work, do not ask for leave.
3.2.2 Do not sleep or doze off at work. If the total exceeds three times, the labor contract shall be terminated.
3.2.3 In the workshop, it is strictly prohibited to talk loudly, eat snacks, take off the guard, stay on guard, chat, joke and fight. Terminate the labor contract for three consecutive times within one month.
3.2.4 Leave must go through the leave procedures, write a note for leave, and be signed by the workshop director and handed over to the production director for approval before leaving. Something must be announced in advance or replaced. Except under special circumstances, no telephone leave or leave is allowed.
3.2.5 Non-employees of the unit and off-duty employees of the workshop are not allowed to enter the workshop. Visitors approved to enter the workshop shall be accompanied by the factory leaders and led by the workshop director and enter the workshop in an orderly manner, which shall not affect the production. Trial personnel enter the workshop and are brought in by the workshop leader.
3.3 Preparation before starting up:
3.3.1 Operators must first check whether the voltage of the equipment is normal and whether there are sundries or things unrelated to production around the equipment before starting the equipment.
3.2.2 Carefully read the production task notice and process sheet; The packaging materials and auxiliary materials related to the production of the order shall be obtained according to the requirements of the process sheet.
3.4 Production debugging:
3.4.1 According to the requirements of the process sheet, install the bag-making base material in the center of the feeding shaft with the hydraulic truck, and inflate the gas expansion shaft with the air gun. Start the pneumatic lift to put the base material in the right position. Check if there is any defective strip in this roll substrate. If there is, keep the joint position in mind so that defective products can be removed during bag-making.
3.4.2 Wear materials correctly.
3.4.3 After the completion of threading, the hot sealing cutter that meets the requirements of the product can be replaced according to the requirements of the process.
3.4.4 Connect the power supply of the main engine, cooling water, electrostatic elimination device and compressed air source, and set the appropriate temperature of the corresponding hot sealing knife through the operation interface according to the process requirements.
3.4.5 Set feeding tension and air pressure, and put in automatically.
3.4.6 Send the material to the cutting position required by the process sheet through the feeding button, and adjust the sensitivity of the bag-making length tracking electric eye. If you need to punch, adjust the position of the punch hole and the tear port.
3.4.7 Through the human-machine interface, set the bag-making size, bag-making feeding speed, finished product quantity and sealing ratio according to the requirements of the process sheet.
3.5 Start production:
3.5.1 When everything is ready, start the equipment to start bag-making.
3.3.2 For the first batch of products of the equipment, the length error of the finished bag making products, the heat sealing strength and the detection that may affect the product quality should be checked in detail.
3.5.3 Put qualified products into the finished product box, paste the certificate outside the finished product box and seal it with tape for storage.
3.5.4 During the operation of the machine, pay attention to the changes of the equipment at any time, such as temperature and pressure. The surface of the equipment should be cleaned at any time. It is strictly prohibited to pile the waste anywhere. The assistant should clean the surrounding equipment 30 minutes before the end of the work day, otherwise the successor has the right not to take over the work.
3.5.5 In case of equipment failure, especially electrical failure, it shall timely report to the bag-making squad leader, fill in equipment Failure Repair Report and notify the maintenance personnel.
3.6 stop:
3.6.1 After the stop of the order, the site must be cleaned up, the finished products must be packed and wait for the next batch of products.
3.6.3 If the bag-making machine stops for more than one shift, water, electricity and gas shall be shut down.
3.7 Safe operation methods in the production process
3.7.1 Heat-resistant gloves must be worn when replacing the heat sealing knife, and care should be taken to prevent the heat sealing knife from falling down or being injured during installation.
3.7.2 During the operation of the punching device, it is forbidden to clean the paste in the work area by hand, and the machine must be stopped for cleaning.
3.7.3 In the bag-making process, use the tool correctly to avoid the tool scratch.
3.7.4 When using manual forklift, the operation instruction of manual forklift shall be strictly followed.
Ruian Huarui Machinery Co., LTD specializes in producing bag making machine, more related products please pay attention to the official website www.gxzqxz.cn
